Installing the MF Drivers and MF Toolbox
Installing the MF Drivers and MF Toolbox
Install the software to use the machine.
 
The method of installation varies depending on the connection method or environment.
OS
Connection method
Installation method
Windows
USB connection
Network connection
(IPv4 environment)
Network connection
(IPv6 environment)*
Macintosh
USB connection
Network connection
When installing downloaded drivers
Presto! PageManager is not installed by selecting [Easy Installation]. To install the software, select [Custom Installation].
If you are operating in the IPv6 environment, you cannot install the drivers or software following procedures below. Refer to "Installing the MF Drivers on the WSD Network (For Windows)" to install MF Drivers.
You may not be able to use the scan function in the IPv6 environment.
IMPORTANT
User rights for logging on to Windows
Log on as a user with administrative rights.
When installing via USB connection
Connect the USB cable after the software installation.
Make sure that the power of the machine is turned ON when connecting the USB cable.
When installing via network connection
Before starting the installation, check the following.
The computer and machine are connected via the network.
The power of the machine is turned ON.
The IP addresses are properly set up.
» Installing the MF Drivers and MF Toolbox
0H1R-004